Good for certain rifles but prob not for an AR-15
Mounted on an RRA AR-15.
I purchased the "Tactedge 4x32 Mini CQB TS Mil-Dot Scope" mainly for kicks thinking it would hold me over until I receive my Nikon Prostaff. It arrived fast I opened it and noticed that it was pretty decent quality right off the bat. The fit and finish is good the pop up lens-cover is nice the extra battery (2 in total) is nice the lens cleaning cloth is a joke (rough pool table cloth) and the optics are crisp and are quite decent on the stock setting. The light gathering does well nothing super astonishing but good none the less. It will work for any daytime shooting and even shooting into the early evening if you have good eyes.
Now for the cons.
1) This probably doesn't come as a shock to anyone but this is not "CQB"... if you think you can use this for fast acquisition and clear a room of targets think again. It has a permanent magnification and you need a full second to align your eye with the reticle. Not close quarters and definitely not fast acquisition.
2) The eye relief spec on this advertisement says "3.5 inches"... lies all lies. 2" at best and even that is stretching it. Why does this matter?.. because that fact such a low amount of eye-relief your eye has to be within 2" of the end... And to mount this on an average rifle (AR or not) you have to mount it far to the rear (FAR to the rear). Think of it... the scope is 7-1/2" long the rear mounting ring is somewhere around 1-1/2" from the rear... add 2" for eye relief... and you get a very awkward and uncomfortable recipe.
Speaking in numbers your mounting rail has to extend to within (roughly) 3 and 1/2 inches of your eye for this scope to work comfortably.
3) Again this is a fixed magnification scope. No real adjustments.
Long story short it looks real funny on an AR-15. It's extended so far to the back that it hangs over some of my collapsible stock and without a doubt you won't be using that charging-handle without reaching under the eyepiece. Being a "mini" scope the front of the scope doesn't even really clear the forward end of the Upper Receiver (being mounted where it is comfortably). At best it may sit flush with the front of the Receiver.
Also these are low profile rings. Anyone with a flat-top and a fixed A2 front sight will have to get a riser. The magnification does not "see through" the post. Infact while looking through the scope without a riser you can see the normal image but it's somewhat fuzzy and dark'ish. So before you blame the optic on being cloudy use a riser. Oddly enough using a riser makes it look even funnier.
In closing FWIW I use my AR-15 with stock fully extended so this may compound the prob. For less than half a bill this is still a steal. Structurally sound enough for .223 but for anyone who cares about practicality (charging handle accessibility eye relief not altering your usual head placement by extending your neck) and the overall look of your rifle I'd stick with either a traditional scope for magnification or a Bushnell Tactical Elite type of optic for quick acquisition. Why recommend an ACOG knockoff? Lets face it if you're reading this review and considering this product you probably don't have a grand to burn on a Trijicon.
Good scope built well enough to withstand .223 or below but impractical on a real AR due to eye relief and subsequent mounting "workarounds".
----------
Edited on 2/1/2010
I was going to return this item but instead I mounted it on a Sig 522 and it works great. For those who don't know the Sig 522 is one of the newest .22 cal assault rifle (semi-auto). While I am confident this scope could handle .223 just fine the below is my final conclusion on why this scope works on the Sig 522 and not the AR-15.
AR-15 deal breakers:
1) Charging handle accessibility is horrible.
2) Mounting rail does not extend back far enough on a flat-top.
3) Riser needed if you have A2 front post sights.
Sig 522 pros:
1) Charging handle on the side of the rifle no issues like an AR-15.
2) Mounting rail extends slightly further back than a flat-top AR-15.
3) Sig 522 has no front post no riser needed for a clear view.
In addition this is a sharp looking scope when mounted on the right rifle. Brings the already aggressive look of a Sig 522 up a notch.
More detail ...
